Tire Installation
Cycle Gear is proud to offer tire mounting services in a majority of our stores. Tire service requires wheels to be removed from your motorcycle in advance. Simply drop your wheel off in-store and an associate will contact you when its ready for pickup. Please allow up to 24hrs for your tire to be installed, occasionally wait-time may exceed this due to staffing and/or tire service volume. To confirm if tire mounting is available at your local store, find your store page via the Store Locator and look for "Tire Installation" under Store Services.
Services include:
Please Note: All street rims that require tubes will require new tubes when tires are installed. For maximum riding enjoyment and safety, Cycle Gear recommends all tubes be replaced at the time of install. Tire tubes degrade over time (chafe, become thin, air valve stem rust and crack) and are more prone to failure.
Additionally, all tubeless rims will require the rubber air valve to be replaced when new tires are installed. Like tire tubes, rubber air valve stems degrade over time and will leak air. Any tubeless tire installation performed at a Cycle Gear location will require replacement of the rubber air valve stems for safety purposes. Exceptions are steel valve stems and TPMS (tire-pressure monitoring systems).
Tires for rims with a diameter smaller than 15" (fifteen inches) or larger than 21" (twenty-one inches) cannot be mounted due to tire machine limitations. Tires wider than 200mm (two-hundred millimeters) cannot be mounted due to tire machine limitations.
Services include:
- Mounting & Balancing for Street tires
- Mounting for Off-Road tires
- Tube changes for all tube-type tires
- Free lifetime Balancing for street tires, requires proof of purchase for original mounting and balancing service
- Street tires: $30.00*
- Off-Road: $20.00*
- Street tires: $60.00*
- Off-Road: $30.00*
- Tube changes: $15.00*
Please Note: All street rims that require tubes will require new tubes when tires are installed. For maximum riding enjoyment and safety, Cycle Gear recommends all tubes be replaced at the time of install. Tire tubes degrade over time (chafe, become thin, air valve stem rust and crack) and are more prone to failure.
Additionally, all tubeless rims will require the rubber air valve to be replaced when new tires are installed. Like tire tubes, rubber air valve stems degrade over time and will leak air. Any tubeless tire installation performed at a Cycle Gear location will require replacement of the rubber air valve stems for safety purposes. Exceptions are steel valve stems and TPMS (tire-pressure monitoring systems).
Tires for rims with a diameter smaller than 15" (fifteen inches) or larger than 21" (twenty-one inches) cannot be mounted due to tire machine limitations. Tires wider than 200mm (two-hundred millimeters) cannot be mounted due to tire machine limitations.