Speedmetal Micro Arrow Stalk Turn Signals

i replaced both front and rear signals on my 07dr650. they are honestly brighter than stock. non led, so no resistors needed. they are universal so just spliced them into the stock wires. tried connecting wires both ways, and signals work, so impossible to wire incorrectly. they are very short, so if you need to space them out you might find something to space them out with.... i used some small pvc pipe, sprayed it black to match, just to push the fronts out for visibility around the headlight. could also use some washers, or rubber bushings-just a thought. just put them on yesterday so cant speak about longevity. seem to be good quality. one of my favorite farkles

PROS: Bright Easy Install

CONS: None yet

First, I had to modify the plug connectors for the wires because they did not fit in the stock receiver. That was no big deal but once you do that, you can't return them. While installing I did a quick check to make sure they worked and there were no issues. Once I tightened up the retaining nut the left signal did not work. I checked to see what the issue was and I found the bulb broke. I assume I tightened the retaining nut too much and it pulled the base of the bulb away from the glass. They look good, they are bright but the quality of the item is sub par...but, for 20 bucks what can you really expect?

PROS: Easy Install, Looks good, Bright

CONS: Easy to break, Poor quality control

Look good, install easy (2 wire only meaning they don't stay on as running lights). Bought two pairs. One light in one pair wouldn't come on (bulb was fine) so returned for another pair. Those were fine but a week later one from the original pair stopped working. Pushing the bulb housing in with needle nose pliers makes it work temporarily until it wiggles itself back out. 2 lights out of 6 were defective. Not good quality control.

PROS: Look Good Safe

CONS: Defective Defective

be careful with them, the other part is glued to the rubber stalk, so they can separate if you hit them too hard with something (your knee, the ground, trees, poles, cars....)

Worked perfect. Plugged right in and worked. No need for resistors or relays like some led lights. Very bright and look clean.

BEST USES: Cleaner Look, Simple Mod, Replacing stock

Use this on eliminator kit for license plate

PROS: Affordable, Good items

CONS: not as bright as LED

i use them front and rear on my 01 gsxr and love'em
the rears on 2yrs no problem yet had the led flush mount not visible at all at distance night or day these arrows blow'em out the water .

PROS: Visible, cheap

Replaced another set of aftermarket short blinkers with these on my 97 Bandit 1200 and I am very satisfied. Much brighter than the set they replaced. Quality seems very good for the price.

PROS: Easy Install, Very bright, Good price

very nice quality on these, very affordable!

PROS: Size, Style, Build Quality

very easy installation