Klock Werks Flare Windshield For Harley Electra Glide / Street Glide 1996-2013

Klock Werks Flare Windshield For Harley Touring

Born from a racer's needs, the Flare Windshield is a purpose built shield meant to solve the issues of instability at high speeds. The Flare is the original motorcycle windshield of its kind, and has surprised riders everywhere with not only how great it looks, but also with how well it performs. It has brought Klock Werks to the top of the list, when it comes to high quality, well designed windscreens. The innovative patented design features "hips" on the outer edges that route wind away from the rider while creating additional downforce on the front end of the motorcycle. This was developed for high speed record attempts in Bonneville, but its design proved to be unsurpassed for the average street rider, as well. This results in a significant improvement in wind deflection and front end stability at highway speeds as opposed to a stock type windshield. The "flip" at the top of the Flare is designed to reduce buffeting by kicking the wind up and allowing it to flow back as "clean", less turbulent air for the rider. It offers wind protection equivalent to a standard shield measured at about 2" taller.

Features:

• The 3.5" is designed for shorter riders and those accustomed to using a short windshield - comparable in height to stock Street Glide windshields
• The 6.5" was the first height created for batwing-style fairings and works great for average height riders
• The 8.5" blends the sporty style of the 6.5" with the taller touring height and performance of the 11.5", and is suited for riders tall enough to look over only
• The 11.5" is is comparable in height to a stock Electra Glide windshield and offers the most protection while providing downforce and the benefits of the original Flare windshield
• Wind tunnel designed and tested, the “hips” provide added downforce while the “flip” directs air over the rider
• Lexan Polycarbonate with FMR hard coating is used to create these custom-molded designs with unmatched durability
• Pre-drilled for easy mounting using stock windshield hardware
• The Flare windshields are measured from the center bolt hole to the start of the 'flip' at the top of the windshield
• Made in the USA