Dynojet Power Commander V For Harley Street 500 2015-2016 [Previously Installed]

Note: This item has been previously installed. Signs of installation may be present including opened packaging and minor scratches. The item may be missing tags, manuals or installation instructions, however it is fully functional.

Dynojet Power Commander V For Harley Street 500

Modification of your bike's EFI is essential if you have added a high-flow air filter, aftermarket exhaust system or smog block-off plates. All of these modifications will, in some way, alter the air/fuel ratio in your engine. The Dynojet PCV, with its microprocessors and PCV Software, allows you to adjust your motorcycle’s fuel map up to +250%/-100% to ensure an optimal setting. Dynojet offers a large database of free, downloadable maps for many combinations of motorcycles and aftermarket parts.

In addition to the pre-made maps, a custom map can be built from the ground up with the aid of a Dyno. Furthermore, a fuel map can be customized on a per gear, per RPM and per throttle position basis. Air/fuel ratios, spark control, and cylinder temperatures can now be altered without complication or headaches. Both street and race riders will benefit from from the PCV. For example, a daily commuter may find it beneficial to have a low end torque map while the club racer would benefit from a smooth and peak power map.

The Dynojet Power Commander is the most well known fuel controller on the market due to its capabilities and versatility.

Features:

• Reduced size from PCIII USB - less than half of the size of Power Commander III
• USB powered from computer, 9 volt adapter is no longer needed for programming
• "Warm Up" fuel adjustment reads engine temp and allows fuel/timing adustments based on the reading
• 2 position map switching function built in (map switch not included)
• Gear/Speed input allows for map adjustment based on gear and speed
• Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
• With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear - for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables
• Unit has a -100/+250% fuel change range (up from -100/+100%), this allows more adjustment range for 8 injector sportbikes
• 10 throttle position columns (up from 9 on PCIII USB)
• Enhanced “accel pump” utility for increased adjustment and sensitivity ranges
• Made in the USA