For front end servicing your bike, the Trackside Front Paddock Stand is just the ticket. Easy to use and the perfect compliment to the Trackside Rear Stand (must be used with a rear stand). All steel tube construction ensures years of dependable service. Stand and deliver!
Made from heavy-duty 38mm steel tubing
Black powder coated to resist corrosion
Dual caster on each leg support for stability
Self aligning rubber covered support lift from the bottom of the forks
MUST be used in conjunction with a rear stand
Recommended for use with the Trackside Rear Paddock Stand
The bolts that hold the pads on should have be put on differently. there is barley enough clearance that if you are not very careful you will scrape the blots across your rotors. Simple fix just grind off the bolt and half the attaching nut and you will have no issues with the rotors getting scratched up.
the stand does its job except that there are two poorly placed nuts on the inside of the two paddings where the forks sit. i've scratched up my inner brake rotors multiple times because of this. it happens when the front wheel jerks to one side while i am lifting the bike(which will happen a lot) and into these sharp nuts that are protruding out past the paddings.
I bought both the front and rear Trackside stands for my FZ-07. Stable, secure, easy to pull into lift position. They work great together. This is coming from a customer who's last stands were Pit Bull but I sold them when I was bike-less for a couple of years. Cannot beat the performance and value of these Trackside stands.
i used my product on a 2014 R6. My project involved changing the brake lines and painting the wheels. I needed to put my bike in the air without braking the bank. I am now able to do any project i like including changing tires, greasing the chain ect.
PROS: very strong, Very Light Weight, Works With Most Bikes, Easy to use