Griot's Garage G21 Long Throw Orbital 6" Polisher

Griot's Garage G21 Long Throw Orbital 6" Polisher

Designed from the ground-up with paint professionals in mind, the Griot's Garage Long Throw G21 Polisher has the power, pad rotation and control to take your paint correction to a higher level. The G21 combines Griot's "big block" 1,100-watt motor with a 6" backing plate and orbital throw drive. The non-circular, eccentric pattern sports a whopping 21mm throw.

Compared to the smaller Griot's Garage G9 Polisher, the G21 features the same ergonomic elements with a 20% bigger housing, 22% more power and maxes out at 4,500 orbits per minute. The proprietary fan-integrated backing plate and billet counter balancer are exclusive to the G21 (and G15) polishers and are designed to reduce vibration - especially while running heavier microfiber buffing pads (versus foam). Put simply, Griot's G15 and G21 Long Throw Polishers are best in class and engineered to exceed the highest professional expectations. 

Note: When converted to a 5" backing plate and fitted with a BOSS Microfiber Fast Cutting Pad, the G21 is Griot's most aggressive paint correcting combination. It should be noted that long-throw polishers are not ideally suited for application of waxes and sealants. The extended throw tends to cure the wax unevenly (with the exception of Griot's BOSS Finishing Sealant - which is designed to comply with the heat cycling of long-throw orbits). The G8 or G9 Polare most suitable for wax application.

Features: 

• Powerful 1,100-watt, 10-amp "big block" motor
• 21mm orbit throw
• Designed for efficient paint correction 
• Fitted with 6" fanned orbital backing plate
• Fan-cooled counter-balance (patent pending)
• Premium bearing construction
• Variable speed: 3000-4,500 RPM 
• 10-foot quick-connect 16 AWG SJO rubber power cord
• 6 speed settings
• Speed dial accessible for right- and left-hand users
• Constant speed control
• Double-shot rubber platypus head-grip and grip pads
• Shroud grip contoured to accommodate four fingers
• Rest pads for tool to lay stable on its back
• Quick access brush side ports
• Convertible to a 6" pad system with optional 6" BOSS Fanned Orbital Backing Plate (sold separately) 

Includes: 

• Polisher
• 6" fanned backing plate
• 5mm hex backing plate wrench
• Replacement high-carbon brushes