Dynojet Power Commander V Victory 106 cu in Models

Modification of your bike's EFI is essential if you have added a high-flow air filter, aftermarket exhaust system or smog block-off plates. All of these modifications will, in some way, alter the air/fuel ratio in your engine. The Dynojet PCV, with its microprocessors and PCV Software, allows you to adjust your motorcycle’s fuel map up to +250%/-100% to ensure an optimal setting. Dynojet offers a large database of free, downloadable maps for many combinations of motorcycles and aftermarket parts.

In addition to the pre-made maps, a custom map can be built from the ground up with the aid of a Dyno. Furthermore, a fuel map can be customized on a per gear, per RPM and per throttle position basis. Both street and track riders will benefit from from the PCV. For example, a daily commuter may find it beneficial to have a low end torque map while the club racer would benefit from a smooth and peak power map.

The Dynojet Power Commander is the most well known fuel controller on the market due to its capabilities and versatility.

Features:

• Allows up to 24 separate fuel tables for 4 cylinder bike with a six speed transmission
• Fuel maps can be setup for optimal MPG or power
• Flip between 2 different maps on-the-fly with the PCV Map Switch (sold separately)
• 10 customizable throttle position columns
• OEM style connectors
• Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
• Reduce low RPM throttle chop
• Reduce running temperature with additional fuel
• Made in the USA
• Dynojet C3 Mobile App allows you to communicate and adjust your installed Power Commander V
  • Available for free on Google Play
  • Enable REV X-tend
  • Configure quick shifter options
  • Calibrate throttle position
  • Requires Micro USB cable and USB to Micro USB adapter (sold separately)

Note: Dyno Power Commander V software is only compatible with a Windows PC.

• Reduced size from PCIII USB - less than half of the size of Power Commander III
• USB powered from computer, 9 volt adapter is no longer needed for programming
• "Warm Up" fuel adjustment reads engine temp and allows fuel/timing adustments based on the reading
• For use on 2009 and up applications
• 2 position map switching function built in (map switch not included)
• Gear/Speed input allows for map adjustment based on gear and speed
• Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
• With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear - for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables
• Unit has a -100/+250% fuel change range (up from -100/+100%), this allows more adjustment range for 8 injector sportbikes
• 10 throttle position columns (up from 9 on PCIII USB)
• Enhanced “accel pump” utility for increased adjustment and sensitivity ranges