Biltwell Gringo S / Lane Splitter Hardware Kit



Biltwell Gringo S Shield Hardware Kit

Subtle details can be some of the loudest statements you can make. These fancy little bits allow you to personalize any Gringo S or Lane Splitter helmet. Get a couple of different colors and go nuts. The Hardware Base-Plate is also available separately.


  • Includes a set of 1/4"-20 x 1/2" screws and matching pivot plates 
  • Anodized aluminum
  • Sold as a pair

Note: Biltwell recommends using a mild Loctite when reinstalling the shield. It will help prevent the screw from backing out and flying off. Also, make sure the indexing marks on the washers are lined up with the plastic backing plate on the helmet. Just rotate the collars until you feel them engage the plate. This will ensure the best fit possible and make sure your shield maintains good functionality.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Product Style Item # Manufacturer Product # Availability
Black 1023999 0034-030-0100/HK-BLK-GS-SB In Stock: Ships within 24 hours
Silver 1024000 0034-030-0700/HK-SIL-GS-SB In Stock: Ships within 24 hours
Red 1024002 0034-030-0600/HK-RED-GS-SB Out of Stock
Gold 1024003 0034-030-1000/HK-GLD-GS-SB In Stock: Ships within 24 hours
Blue 1024001 0034-030-0800/HK-BLU-GS-SB In Stock: Ships within 24 hours
Bronze 1084167 0034-030-0900/HK-BRZ-GS-SB In Stock: Ships within 24 hours