Step 1: Approach rear of sissy bar and study all possible mounting points. As all bikes are different, many mounting points will vary in location. Use good common sense. Open rear cover to expose velcro straps and adjustable buckle straps.
Step 2: Remove these two adjustable buckle straps. Adjust Velcro straps so it is tight around the sissy bar. Use as many as your sissy bar will permit.
Step 3: Adjust straps.
Step 4: Find the adjustable buckle strap from step 2.
Step 5: Use the end of the strap with the loop to go through the metal D-ring at the top of the bag. Run the strap back through the loop. Pull the strap snug so the loop closes on itself.
Step 6: Run under mounting point and back up to female side of the buckle and secure. Make sure adjustment of strap is very snug.
Step 7: Adjust strap so it tight.
Step 8: Repeat steps 7 & 8 for the other side.
Step 9: Push cover under two adjustable buckles straps to, once again, cover the Velcro straps.
Step 10: Work to make back pad smooth and without wrinkles so it will be comfortable against the back of a passenger.
Step 11: Zip the cover closed.
Step 12: Make sure bag is mounted securely. If the upper roll bag is not being used, then we are finished here. Of course, if the user is carrying more weight than normal, he can continue on with steps 14-24.
Step 13: There are two different lengths of adjustable buckle straps. Let's start with the long one.
Step 14: Use the end of the strap with the loop to go around a mounting point on the bike chassis. Run the strap back through the loop. Pull the strap snug so the loop closes on itself.
Step 15: Connect male clip to female clip in pocket at top of main bag.
Step 16: Make sure you connect to outside female clip. The inside clip will be used to secure the roll bag.
Step 17: Adjust strap and pull tight.
Step 18: Repeat steps 14-18 for the other side of the bag.
Step 19: Go to rear of bag and find good mounting points.
Step 20: Use the loop end of the adjustable strap to secure the strap to the chassis.
Step 21: Snap buckle and adjust tightly. Note to use outside female clip as in step 17 on the other side of the bag.
Step 22: Repeat steps for the other side of the bag.
Step 23: If the user wants to use the roll bag, it is mounted on the top of the tail frame bag.
Step 24: Use the short double male clip straps to secure roll bag to main bag.
Step 25: Secure all 6 straps and tighten all of them equally to the roll bag sits level and straight on top of the main bag. If your bike has a tall sissy bar, then the Velcro straps can be used to hold directly to the bar also. If the you want to use the roll bag alone, without the large main bag, then follow all the same mounting instructions and concepts.
Step 26: Check and see how secure the bag is on the bike. It might need some periodic adjustment between rides because of the natural movement of internal cargo.
About The Brand
Rapid Transit has the luggage you need to make the trip. Choose from tank bags, tail bags, saddle bags, mid packs, triple tree bags and backpacks, knowing that their motorcycle specific design will work with your bike.
SKU : web1005804
Great SALE Price!Was $169.99$152.99
Sign Up for Email!Enter your email for new arrivals, brands and special offers.
100% Satisfaction Guarantee
We want you to be completely satisfied with your order. If not, we'll make it right!